Cleaning, Notices, Storage And Disposal; Warranty - Wittmann Tempro basic C 90 Translation Of Original Operating Manual

Tempro basic C 90 & Tempro primus C 90
Page 37

8.1 Cleaning, Notices, Storage and Disposal

Cleaning
All paneling parts of the tempering device are painted. If a non-aggressive
cleaning agent is used it is possible to also optically maintain the devices in perfect
condition.
Notices
CAUTION The device must not be used as a supporting surface, since otherwise
the circulation of air through the top ventilation slits will be impaired and
overheating could occur.
In addition, the device must not be used as a climbing aid, because, due to
the steering rollers, it can roll away and then injuries can occur. Apart from this,
the top cover is not designed for such stresses. Load-bearing capacity max. 30 kg.
Storage
Before prolonged storage, carry out the following work on the device
- Drain tempering circuits
- Inspect device and rectify determined defects
- Clean with non-aggressive cleaning agent
- If possible do not store below 0°C, otherwise allow to stand for at least 1 hours at
room temperature before the next commissioning.
Disposal
Always dispose of the device only according to national regulations.
It is recommended to authorize a company specialized for this purpose.

8.2 Warranty

We take over warranty for defects due to faulty construction, material or design for
a period of 12 months as of the receipt of the goods by the customer.
Complaints must be made immediately and in writing.
We are not liable for damage caused by natural wear and tear, excessive use,
faulty treatment, inappropriate resources, inadequate maintenance etc.
For further details see the Terms of Sale and Delivery.
In case of transport damage please do not send the stabilizer back but
immediately notify our nearest customer service department.
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012