Otto Bock 8E70 Instructions For Use Manual page 58

Compliance with the requirements according to "FCC Part 15" (USA)
Non-ionising radiation
Manufacturer
Article number
Protect from moisture
Type BF applied part
12.3 Operating states/error signals
The prosthesis indicates operating states and error messages through beeps and vibration sig­
nals.
12.3.1 Beep and vibration signals
INFORMATION
Feedback signals can be turned off
When the feedback signals have been turned off in the adjustment software, the beeps and/or
vibration signals are not generated in certain cases (see table). Signals in case of a product
error are generated even when the feedback signals have been turned off.
Beep signal
1x short
1x short
1x short
1x short
58
Vibration signal When
1x short
1x short
1x short
1x short
After releasing
the program
switch
After releasing
the program
switch
While pressing
the program
switch
While pressing
the program
switch
Signal can be
deactivated
Yes
Yes
No
Yes
Function
Switching
between primary
and secondary
grips
Hand is switched
on
Bluetooth func­
tion is deactivated
Donning mode
was activated