Otto Bock 8E70 Instructions For Use Manual page 46

• 757B35=5 MyoEnergy Integral
• 757L35 MyoCharge Integral battery charger (including 757L16-4 power supply)
• 757L24 DynamicArm battery charger (already included in the scope of delivery for the
12K100* elbow component)
Connection to the prosthetic socket
• 9E169 coaxial plug (only with 8E70=* and 8E72=*)
• 10S4 coupling piece (only with 8E70=* and 8E72=*)
• 13E129=G* electrode cable with straight plug and plug connector (when using the
9X50/9X52 linear control elements or 13E200/13E202 electrodes)
• 13E190 or 13E190=150 switch block
Lamination rings
• 9S110=* lamination ring (included in the scope of delivery for the 8E71=*)
• 10S1=* lamination ring (for 8E70 and 8E72)
• 706Z10 pliers (to unscrew the 8E71=* bebionic hand Short Wrist)
Switches and control elements
• Pressure switch: 9X37
• Cable pull switch: 9X18
• Linear control element: 9X50
• 13E520=* Myo Plus TR
Prosthetic glove
• 8S710=* prosthetic glove
6 Preparation for use
6.1 Charging the battery
The following information is found in the instructions for use of the respective batteries or elbow
components:
• Handling the battery
• Querying the charge level
• Feedback (beeps and vibration signals)
6.2 Adjusting the thumb position
The thumb of the terminal device is aligned for the tripod grip on delivery (see Page 33).
The thumb position needs to be adjusted for certain grips. Two different adjustment options are
provided on the thumb for this purpose:
46
• Linear control element: 9X52
• 13E200=* electrode
• 13E202=* suction socket electrode
• 8S711=* prosthetic glove