Raven SmarTrax Installation Manual page 20
Case ih x010, x120, and x230 series steering ready combines
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
C
3
HAPTER
FIGURE 21. Machine's WAS Connection on Frame
8. Trace the WAS cable along the machine's frame.
9. Disconnect the machine's WAS connection.
FIGURE 22. WAS Connection
10. Install the mating 3-pin connectors from the valve harness on the machine's WAS connectors.
11. Loop and tie-off any excess cable with plastic cable ties, ensuring the cables are secured away from moving
parts and heat sources.
16
Case IH X010, X120, and X230 Series Steering Ready Combines SmarTrax™ Installation Manual
Advertisement
Table of Contents
