Install The Left And Right Steering Hoses - Raven SmarTrax Installation Manual

SmarTrax Valve Mounted to the Machine
FIGURE 1.
Filter Bolts
Mount the valve mounting bracket to the machine using the existing cab support mounting holes and two
3.
3/8"-16 UNC x 1-1/2" hex bolts (P/N 311-0054-107), four washers (P/N 313-2300-014) and two 3/8" nylon
insert lock nuts (P/N 312-4000-061).
Note:
The machine may have only one existing mounting hole. If this is the case, drill a second mounting
hole using the valve mounting bracket as a guide.
Note:
The two bolts on the filter bracket will have to be removed if the second mounting hole has to be
drilled.

Install the Left and Right Steering Hoses

Machine's Existing Steering Hoses on Steering Orbital
FIGURE 2.
Disconnect the machine's left steering hose from the steering orbital.
1.
P/N 016-4001-100 Rev. C
Hydraulic System Installation
Left Steering
Port
Right Steering
Port
11