Chapter 3
Install Fittings in the SmarTrax Valve
Before mounting the SmarTrax valve (P/N 063-0131-129) on the machine, install the proper fittings in the
valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.
Fitting - -6 JIC (M) to -6 SAE O-Ring (M) Straight Adapter
Fitting - -6 JIC M/F 90° Swivel Elbow
Transducer - 0-3000 PSI Pressure
Mount the SmarTrax Valve
Identify the SmarTrax valve (P/N 063-0131-129) mounting location on the front cab support on the left side
1.
of the machine.
Install the SmarTrax valve on the valve mounting bracket (P/N 107-0171-908) using four 5/16"-18 x 7/8" hex
2.
bolts (P/N 311-0052-104) and four 5/16" lock washers (P/N 313-1000-019).
10
The appearance of the Smartrax hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Fitting
Versatile SX275 SmarTrax™ Installation Manual
NOTICE
Part Number
333-0012-045
333-0012-042
422-0000-086
Port
A, B,
P, T,
LSPV,
LS STEER
P, T
PS