Tank Hose Installed
FIGURE 10.
Disconnect the machine's tank hose from the steering orbital.
6.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) in the open port of the steering
7.
orbital.
Connect the machine's tank hose to the opposite end of the installed tee fitting.
8.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-778) on the 90° end of the installed tee
9.
fitting.
Note:
It may be necessary to install a -8 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) or -8
ORFS M/F 45° swivel elbow fitting (P/N 333-0012-102) on the installed tee fitting to achieve the
connection.
Tank Hose Installed on SmarTrax Valve
FIGURE 11.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax
10.
valve.
Manual No. 016-4001-126 Rev. B
Hydraulic System Installation
Tank Port
15