Raven SmarTrax Installation Manual page 25

Removing Instructional Seat Molding
FIGURE 4.
Remove the plastic molding under the instructional seat by removing the nuts and bolts securing it.
4.
Node Mounted to Mounting Plate
FIGURE 5.
Mount the SmarTrax node (P/N 063-0173-228) to the node mounting bracket (P/N 107-0172-084) using
5.
three 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
Place the node in the instructional seat compartment so the connectors face away from the operator's seat.
6.
Secure the node mounting bracket to the existing bolts in the floor of the cab using four 1/4" zinc split lock
7.
washers (P/N 313-1000-016), four washers (P/N 313-2300-009), and four M6 lock nuts (P/N 312-4000-
207).
Manual No. 016-4001-126 Rev. B
Plastic
Molding
Cab Component Installation
21