Raven SmarTrax Installation Manual page 29

Node Mounting Bracket Installed
FIGURE 12.
Secure the node mounting bracket to the machine's bracket using two 1/4"-20 x 1-1/4" hex bolts (P/N 311-
4.
0050-106), two 1/4" flat washers (P/N 313-2300-009), and two 1/4"-20 nylon insert lock nuts (P/N 312-4000-
057).
Node Installed on Mounting Bracket
FIGURE 13.
Align the holes in the node with the holes in the node mounting bracket.
5.
Install two 5/16"-18 x 7/8" hex bolts (P/N 311-0052-104) and two 5/16" zinc flanged lock nuts (P/N 312-
6.
1001-169) in the top and right node mounting tabs.
Manual No. 016-4001-126 Rev. B
Cab Component Installation
25