Table of Contents
Advertisement
Replaceable Parts
Description of This Chapter
Description of This Chapter
The following tables contain the replaceable part numbers for ECal options and
accessories. Refer to
"Inspecting ECal Module Kit" on page 2
order a part, note the description, Agilent part number, and the quantity desired.
Telephone or send your order to Agilent Technologies. See
7 mm Modules and Accessories
a
Description
Wrenches
3/4 in, 135 N-cm (12 in-lb) torque wrench (supplied with
7 mm kits)
1/2 in to 9/16 in open-ended wrench (supplied with N4696B)
Protective End Caps
DB25 multi-pin connector cap
7 mm connector cap
36-pin connector cap, ESD protected
Gages and Accessories
7 mm pin depth gage and master
Other
7 mm collet extractor tool (supplied with 7 mm kits)
Replacement 7 mm collet
Electronic calibration module reference manual
USB cable, 1.8 meter
Adapter cable, DB25 to AMP Champ (36-pin)
Storage box for the ECal module and accessories
a. See
"Clarifying the Terminology of a Connector Interface" on page
b.
See"Printing Copies of On-Line Documentation" on page iv
6-2
for the contents of each kit. To
"Contacting Agilent" on page
Qty
1
1
as required
as required
as required
1
1
1
b
1
1
1
1
15.
Part Number
8710-1766
8710-1770
1252-4690
1401-0249
N4693-40002
85050-80012
5060-0370
85050-20001
N4693-90001
8121-0506
8121-1047
N4693-60042
2.
Chapter 6
Advertisement
Table of Contents
