Unpacking; Power Connection; Power Cords - Cablescan 90 Series Reference Manual

2.0 Setup - Series 90/90HV
Page 1
UNPACKING
The major components of the Series 90/90HV are packaged in foam-packed shipping cartons.
Carefully unpack the components, and set the containers aside for future use. Visually inspect
each component for damage or deficiency. Record any deficiencies and report them to
Cablescan. In the event the equipment has been damaged as a result of shipping, notify the
carrier and Cablescan immediately.
The Series 90/90HV will consist of a minimum of three containers:
1. System Controller
2. Expansion Cabinet
3. Keyboard, VGA Color Monitor, and Manuals
Depending on the capability ordered, there may be other containers for additional expansion
cabinets. The optional printer is also shipped in an individual container.
POWER CONNECTION
Before applying power to the Series
90/90HV,
make sure that the operating voltage is correct and
the unit is properly grounded (see GROUNDING THE UNIT, below). For changing voltage
settings see CHANGING POWER SETTING, below.
POWER CORDS
All power cords are supplied with North American type plugs. The plug ends must be replaced
for countries with another standard. To help make the change easier, the power cord wires are
coded with the International color code standard. A translation table for the North American and
International color code standards is provided below.
COLOR CODE
GROUND
green/yellow green