Cablescan 90 Series Reference Manual page 27

2.0 Setup - Series 90/90HV Page 21
FILE MANAGER - S90FILES.EXE
The File Manager is used to maintain programs that are stored on disk. The Series 90 allows 24-
character file names and maintains a cross reference between them and the actual DOS file,
which has 8-character file names. Therefore, the File Manager must be used in lieu of DOS
when copying, deleting, and moving programs.
COMPILER PROGRAM - S90GEN.EXE
The Compiler Program is used to process the wire list after it has been edited. \Vhen a wire list
program has been created or modified through the Editor, a test file must be generated before
selecting Test or Build.
IMPORT PROGRAM - S90PORT.EXE
The Import Program is used to bring into the Series 90 system additional wire list programs that
have been created by other means. This includes Model 512 and 4000 wire lists or wire lists
from ASCII files.
PRINT PROGRAM - S90PRINT.EXE
The Print Program is used to obtain hard copies in various formats such as wire list, user labels,
used points list, and the options for each program. The Print Program is accessed through the
Main Program and through the Program Editor.
STATISTICS PROGRAM - S90STAT.EXE
The Statistics Program is used to evaluate and generate reports from data gathered in the build
and test modes.
TEST PROGRAM - S90TEST.EXE
The Test Program is used to perform tests on completed assemblies. The Test Program is
selected through the Run category of the Main Program.