Table of Contents
Advertisement
2.0 Setup
Changes may be necessary to the following system file(s).
C:\AUTOEXEC.BAT
C:\CONFIG.SYS
•
If you want the system to do the changes, select 1,
below.
•
If you want example files created as guidelines for your
use in in making changes, select 2.
•
If changes have been made already, select
3.
Use up/down arrows for making selections.
1.
Go ahead and modify
2. Create example files
3.
Bypass these changes
Page Ii
Use the up and down arrows to highlight the appropriate response. lfthe you select to
allow the installation software to make the changes, the following window will open.
Please indicate your computer boot drive.
This drive's
boot directory should contain the AUTOEXEC.BAT and
CONFIG.SYS files, if any.
[C]
12. The default drive letter is C. lfyour PC boot is not C, type the appropriate letter. and
press ENTER. The follo\ving window will open:
We need to examine the following file.
C:\AUTOEXEC. BAT
in the unlikely event that the path shown below is not
correct or the file uses an alias, please change it. If
the file does not exist, simply leave the box as it was
on
and press the <Enter>
Advertisement
Chapters
Table of Contents
