Configuring 386-Based Systems - Cablescan 90 Series Reference Manual

2.0 Setup - Series 90/90HV
Page 15
Configuring 386-Based Systems
1. Press CTRL, AL T, and DELETE keys simultaneously to "warm start" the system.
2. Press the DELETE key while the system is resetting. After a delay, the main BIOS
Setup Program screen will display:
BIOS SETUP PROGRAM - AMI BIOS SETUP UTILITIES
C) 1990 American Megatrends Inc., All Rights Reserved
STANDARD CMOS SETUP
ADVANCED CMOS SETUP
ADVANCED CHIPSET SETUP
AUTO CONFIGURATION WITH BIOS DEFAULTS
AUTO CONFIGURATION WITH POWER-ON DEFAULTS
CHANGE PASSWORD
HARD DISK UTILITY
WRITE TO CMOS AND EXIT
DO NOT WRITE TO CMOS AND EXIT
Standard CMOS Setup for Changing Time, Date, Hard Disk Type, etc
Esc:Exit Arrows:Select F2/F3:Color PU/PD Modify
3. With the cursor positioned on the first line, STANDARD CMOS SETUP, press
ENTER. The following Warning Information screen will display:
BIOS SETUP PROGRAM - WARNING INFORMATION
(C) 1990 American Megatrends Inc., All Rights Reserved
Improper Use of Setup may Cause Problems
If System Hangs, Reboot System and Enter Setup by
Pressing the <DEL> key
Do
any
of the following After Entering Setup
(I Alter Options t.o make System Work
(il) Load BIOS Setup Defaults
(iii) Load Power-On Defaults
trit
<ESC>
t:o
nOli.· J.'-I.ny
other
to COD.ti.1J,tle