Table of Contents
Advertisement
Page 12
2.0 Setup - Series 90/90HV
Configuring 486-Based Systems
1. Press CTRL, ALT, and DELETE keys simultaneously to "warm start" the system.
2. Press the DELETE key while the system is resetting. After a delay, the main BIOS
Setup Program screen will display:
AMIBIOS SETUP PROGRAM - BIOS SETUP UTILITIES
C) 1992 American Megatrends Inc., All Rights Reserved
STANDARD CMOS SETUP
ADVANCED CMOS SETUP
AUTO CONFIGURATION WITH BIOS DEFAULTS
AUTO CONFIGURATION WITH POWER-ON DEFAULTS
CHANGE PASSWORD
AUTO DETECT HARD DISK
WRITE TO CMOS AND EXIT
DO NOT WRITE TO CMOS AND EXIT
Standard CMOS Setup for Changing Time, Date, Hard Disk Type, etc
Esc:Exit
Arrows:Select
F2/F3: Color
FlO: Save
&
Exit
3.
With the cursor positioned on the first line, STANDARD CMOS SETUP, press
ENTER. The following Warning Information screen will display:
AMIBIOS SETUP PROGRAM - WARNING INFORMATION
(C) 1992 American Megatrends Inc., All Rights Reserved
Improper Use of Setup may Cause Problems
If System Hangs, Reboot System and Enter Setup by
Pressing the <DEL> key
Do anr of the following After Entering Setup
(I
Alter Options to make System Work
(ii)
Load BIOS Setup Defaults
(iii) Load Power-On Defaults
Hit <ESC> to Stop now, Any other Key to Continue
4.
Press ENTER to continue to the STANDARD CMOS SETUP screen as shown
below:
•
•
•
Advertisement
Chapters
Table of Contents
