Cablescan 90 Series Reference Manual page 23

2.0 Setup - Series 90/90HV Page 17
BIOS SETUP PROGRAM
-
ADVANCED CMOS SETUP
(C) 1990 American Megatrends Inc. , All Rights Reserved
Typematic Rate Programming
:
Disabled Adaptor ROM Shadow C800,32K: Disabled
Typematic Rate Delay (msec
:
500 Adaptor ROM Shadow DOOO,32K: Disabled
Typematic Rate (Chars/Sec)
:
15 Adaptor ROM Shadow D800,32K: Disabled
Above 1 MB Memory Test
:
Enabled Adaptor ROM Shadow EOOO,32K: Disabled
Memory Test Tick Sound
:
Disabled Adaptor ROM Shadow E800,32K: Disabled
Memory Parity Error Check
:
Enabled Adaptor ROM Shadow FOOO,64K: Enabled
Hit (DEL) Message Display
:
Disabled
Hard Disk Type 47 RAM Area
:
0: 300
Wait For (FI) If Any Error
:
Enabled
System Boot Up Num Lock
:
On
Numeric Processor Test
:
Enabled
Floppy Drive Seek At Boot
:
Disabled
System Boot Up Sequence
:
A:, C:
System Boot Up CPU Speed
:
High
Fast Gate A20 Option
:
Enabled
Turbo Switch Function
:
Disabled
Password Checking Option
:
Disabled
Video ROM Shadow COOO,32K
:
Enabled
Esc:Exit Arrows: Select (Ctrl)Pu/Pdodify FI:Help F2/F3:Color
F5:0ld Values F6:BIOS Setup Defaults F7:Power-On Defaults
9. Change settings as necessary to match the above screen.
10. When all changes have been made, press ESC to return to the main BIOS Setup
Program screen.
11. With the BIOS SETUP UTILITIES on display, move the cursor down to
ADVANCED CHIPSET SETUP (third line) and press ENTER.
12. press ENTER to continue past the warning screen. The ADVANCED CHIPSET
SETUP will display as shown below:
BIOS SETUP PROGRAM - ADVANCED CHIPSET SETUP
(C) 1990 American
Low CPU Clock Speed
Bus Clock Select
DMA Clock Select
Refresh Command Width
Megatrends
CXIN/2
PROCLK/6
BCLK/2
280 NS
Coprocessor READY cntrl by 82C836
Additional RAM Wait State Disabled
CAS Extend Wait State (Read) : Disabled
RAS
Timeout Feature
Extended Boundary
Global EMS Memory
EMS I/O Port Access
EMS Page Registers
Disabled
None
Disabled
DL:mbled
ElVIS ()
Inc., All Rights Reserved