Table of Contents
Advertisement
Page 28
2.0 Setup - Series 90/90HV
HANDLING CIRCUIT BOARDS
If a circuit board is to be handled outside the cabinet, anti-static measures must be employed.
Any person handling the board must wear an anti-static I-megohm wrist strap connected to
ground. (The wrist strap supplied with the Series 90 for operator use does not have a I-megohm
resistor.) When circuit boards are removed from the cabinets, they should be placed immediately
in anti-static bags. Whenever circuit boards are to be shipped, they should first be placed in anti-
static bags.
SHIPPING AND STORAGE
If any of the major components (system controller, or an expansion cabinet) is to be removed
from use and placed in storage or shipped, it should be packed and properly cushioned in the
original shipping container and properly marked.
If the repackaged component is to be shipped to Cablescan for repair, it should be accompanied
by information pertaining to the malfunction. The information should adequately describe the
problem and symptoms, and should include the name and telephone number of the person to be
contacted, as well as the address to which the unit is to be returned.
•
•
•
Advertisement
Chapters
Table of Contents
