Replacing the bottom cover
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in
After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1
Tilt the computer towards the front until the base is facing up.
2
Align the tabs on the bottom cover with the slots on the chassis and snap
the bottom cover to lock it in place.
3
Turn the computer over and place it in upright position.
Post-requisites
Replace the
left-side
Before working inside your
cover.
computer. For more safety best
computer.
35