Replacing The Bottom Usb Port; Procedure; Post-Requisites - Alienware ALPHA Service Manual

Replacing the Bottom USB
Port
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1
Slide the USB port under the tab on the chassis.
2 Replace the screw that secures the USB port to the chassis.
3
Align and slide the tabs on USB-port bracket in the slots on the chassis.
4 Replace the screw that secures the USB-port bracket to the chassis
5
Route the USB-port cable through the routing guides on the chassis and
slide the cable through the cable-routing hole on the chassis.
6
Turn the computer over.
7 Connect the USB-port cable to the system board.

Post-requisites

1
Replace the top
2 Replace the base
28
Before Working Inside Your
cover.
cover.
Computer. For more safety best
Computer.