Table of Contents
Advertisement
Replacing the display back-cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
instructions in
After Working Inside Your
home page at dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with non-touchscreen display.
1
Place the display back-cover on a flat surface.
2
Adhere the display-board cable and the camera cable to the display back-cover.
Post-requisites
1
Replace the camera.
2
Replace the
display
hinges.
3
Replace the
display
panel.
4
Replace the
display
bezel.
5
Replace the
display
assembly.
6
Follow the procedure from step 5 to step 9 in "Replacing the
7
Follow the procedure from step 3 to step 7 in "Replacing the
8
Replace the
base
panel.
Before Working Inside Your
Computer. For more safety best practices, see the Regulatory Compliance
Computer. After working inside your computer, follow the
palm
rest".
solid-state
drive" .
75
Advertisement
Table of Contents
