Applications; Description - Texas Instruments SimpleLink CC1312PSIP Manual

CC1312PSIP
SWRS293 – NOVEMBER 2023

2 Applications

• 868 and 902 to 928 MHz ISM and SRD systems
with down to 4 kHz of receive bandwidth
• Building automation
– Building security systems –
electronic smart lock,
garage door system,
– HVAC – thermostat,
sensor, HVAC system
– Fire safety system –
fire alarm control panel (FACP)
– Video surveillance –
– Elevators and escalators –
control panel for elevators and escalators
• Grid infrastructure

3 Description

™
The SimpleLink CC1312PSIP device is an RF certified System-in-Package (SiP) Sub-1 GHz wireless
module supporting Wi-SUN®, Wireless M-Bus, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), mioty,
proprietary systems, including the
Cortex ® M4F main processor and optimized for low-power wireless communication and advanced sensing in
infrastructure, building automation,
The CC1312PSIP has a low sleep current of 0.9 μA with RTC and 80KB RAM retention. In addition to the main
Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast
wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at average 1-μA
system current.
The CC1312PSIP has
SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers' 10
to 15 years or longer life cycle requirements, TI has a
longevity and continuity of supply including dual sourcing of key components in the SIP.
The CC1312PSIP device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi
Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1 GHz MCUs, and host MCUs. CC1312PSIP
is part of a portfolio that includes pin-compatible 2.4-GHz SIPs for easy adaption of a wireless product
to multiple communication standards. The common
configuration tool supports migration between devices in the portfolio. A comprehensive number of software
stacks, application examples and SimpleLink
information, visit wireless
PART NUMBER
CC1312PSIPMOT
(1) For the most current part, package, and ordering information for all available devices, see the Package Option Addendum in
13, or see the TI website.
1
See RF Core for additional details on supported protocol standards, modulation formats, and data rates.
2 Submit Document Feedback
motion detector,
door and window sensor,
gateway
wireless environmental
controller, gateway
smoke and heat detector,
IP network camera
elevator main
TI 15.4-Stack. The CC1312PSIP microcontroller (MCU) is based on an Arm
retail automation
Low SER (Soft Error Rate) FIT (Failure-in-time)
™
connectivity.
Device Information
(1)
Product Folder Links:
– Smart meters –
electricity
1
– Grid communications –
communications
applications
– EV Charging infrastructure –
station
– Solar Energy -
– Other alternative energy –
• Industrial transport
• Factory automation and control
• Medical
• Communication equipment
– Wired networking
access points,
and medical applications.
product life cycle policy
SimpleLink Low Power F2 SDK
Academy training sessions are included in the SDK. For more
PACKAGE
QFM
CC1312PSIP
water meter, gas
meter, and heat cost allocators
wireless
– long-range sensor
AC charging (pile)
Micro inverter
energy harvesting
– asset tracking
– wireless LAN or Wi-Fi
edge router
for long operational lifetime. Always-on
with a commitment to product
® , Bluetooth
and SysConfig
BODY SIZE (NOM)
7.00 mm × 7.00 mm
Copyright © 2023 Texas Instruments Incorporated
www.ti.com
meter,
®
grid
® Low
system
Section