KidKraft Cedar Summit Timber Trail Playhouse Installation And Operating Instructions Manual page 68

Step 27: Toybox Assembly
A: Place 2 Toybox Ends upside down so the handles are at the bottom. Place 2 (272) Box Side Panels on each
side between the Toybox Ends and fit 3 (271) Box Bottoms into the top. Attach using 4 (S13) #6 x 5/8" Pan Screws
(with #8 washer) per board. (fig. 27.2)
B: Turn Toybox over and place in lower opening along the outside of the Back Wall. (fig. 27.1)
Fig. 27.2
S13
with #8
Flat
Washer
Toybox
End
Wood Parts
3 x Box Bottom 5/8" x 3" x 42 3/4"
271
4 x Box side panel 5/8" x 3" x 42 1/8"
272
Fig. 27.1
Build upside down
272
28 x
(Hidden)
272
build upside down
271
S13
with #8 Flat
Washer
Hardware
#6 x 5/8" Pan Screw(with #8 Flat Washer)
S13
68
with #8 Flat
S13
Washer
Toybox End
Other Parts
2 x Toybox End