Table of Contents
Advertisement
Step 1: Inventory Parts - Read This Before Starting Assembly
This is the time for you to inventory all your hardware, wood and accessories,
A.
referencing the parts identification sheets. This will assist you with your assembly.
• The wood pieces will have the key number stamped on the ends of the boards.
Organize the wood pieces by step, as per the key numbering system below.
1X 131 Cafe Top FSC 15.9 x 127 x 1225.6 mm
Quantity
• Please refer to Page 3 for proper hardware assembly.
• Each step indicates which bolts and/or screws you will need for assembly, as well as
any flat washers, lock washers, t-nuts or lock nuts.
If there are any missing or damaged pieces or you need assistance with
B.
assembly please contact the consumer relations department directly. Call us
before going back to the store.
customersupport@kidkraft.com
Online Parts Replacement:
Cedarsummitplay.com/parts-center-
warranty-claim
Customer Service:
1(800) 933-0771 or (972) 385-0100
Read the assembly manual completely, paying special attention to ANSI warnings;
C.
notes; and safety/maintenance information.
Before you discard your cartons fill out the form below.
D.
• The carton I.D. stamp is located on the end of each carton.
• Please retain this information for future reference. You will need this information if you
contact the Consumer Relations Department.
Key Number
MODEL NUMBER: P280099
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 1)
Key Number: The first two digits represent the step
number. The third digit represents the piece. Note
that if the part is used in multiple steps then the
Part Description,
number only reflects the first step it is used in.
Part Size
Europe Customer Service: +31 (0)20 305 8620
europecustomerservice@kidkraft.com
EU Online Parts Replacement: parts.kidkraft.eu
15
Advertisement
Table of Contents
