KidKraft Cedar Summit Timber Trail Playhouse Installation And Operating Instructions Manual page 67

Step 26: Attach Doorbell
A: From inside the assembly insert Door Bell into the hole in the Front Wall and attach with 2 (S38) #7 x 1-1/8" Pan
Screws. (fig. 26.1, 26.2)
B: On the outside of the assembly place Doorbell Trim over the hole in the Front Wall, then attach with 2 (S37) #7 x
5/8" Pan Screws as shown in fig. 26.3.
Note: Install 2 AAA/LR03 batteries in Doorbell 2 prior to attaching to assembly. To replace batteries remove
back cover on Doorbell 2, remove both batteries, insert 2 new batteries ensuring the proper polarity is
observed then replace back cover.
Fig. 26.1
Fig. 26.2
Inside View
021
Door
Bell
S38
Hardware
2 x
2 x
#7 x 5/8" Pan Screw
S37
#7 x 1-1/8" Pan Screw
S38
67
Note:
• Use only AAA/LR03
batteries (not included)
• Always replace the whole
set of batteries at one
time, taking care not to
mix old and new batteries.
• Do not mix batteries
of a differnt type such
as, alkaline, standard
(carbonized) or
rechargeable (nickel-
cadmium batteries)
• Remove batteries if
consumed or if product is
to be left unused for long
periods of time.
Fig. 26.3
S37
Outside View
Other Parts
1 x Door Bell
1 x Door Trim
Door
Trim
021