KidKraft Cedar Summit Timber Trail Playhouse Installation And Operating Instructions Manual page 23

Step 5: Attach Door Assembly to Frame
Part 2
B: In the notched out opening of (051) Door Stop attach the Magnetic Catch using 2 (S38) #7 x 1-1/8" Pan
Screws. (fig.5.4)
Important: Use a hand held screw driver and DO NOT over tighten.
C: On the inside of the assembly, attach (051) Door Stop to (021) Panel Assembly with 2 (S15) #8 x 1-3/4"
Wood Screws, making sure (051) Door Stop overhangs by 1-1/4" (32mm) and is in position to receive the Catch
Plate. ( fig 5.3, 5.5, 5.6)
Fig. 5.3
Fig. 5.4
Magnetic
Catch
S38
Wood Parts
1 x Door Stop 15/16" x 2 1/2"x 5"
051
051
Fig. 5.5
1-1/4"
(32mm)
Hardware
2 x #7 x 1-1/8" Pan Screw
S38
2 x #8 x 1-3/4" Wood Screw
S15
23
Fig. 5.6
021
S15
Other Parts
1 x Magnetic Catch
Catch
Plate
041