KidKraft Cedar Summit Timber Trail Playhouse Installation And Operating Instructions Manual page 59

Step 20: Attach Roof to Frame
Part 2
A: Place (201) Roof Panel LF and (202) Roof Panel RF over the (181) Low Window Supports so they meet at
the peak and are tight to the large roof assembly.(fig.20.2 & 20.4)
B: Attach panels to (181) Low Window Supports using 2 (S3) #8 x 2-1/2" Wood Screws per panel. (fig.20.2 &
20.4). Attach panels to (072) Roof Supports using 1 (S11) #8 x 2" Wood Screws per panel. (fig.20.2 & 20.4)
C: Center 1 Narrow Angle Bracket over the slats and attach using 2 (S0) #8 x 7/8" Truss Screws. (fig. 20.4,
20.5)
D: From the underside of the Terrace Roof attach 2 Roof Sinks as shown in fig. 20.4, using 10 (S0) #8 x 7/8"
Truss Screws per piece.(fig.20.3 & 20.4)
Fig. 20.2
193
192
Fig. 20.4
Roof Sink
Wood Parts
1 x Roof Panel LF 1 1/8" x 30 5/16"x 41 1/16"
201
1 x Roof Panel RF 1 1/8" x 30 5/16"x 41 1/16"
202
S11
S3
202
201
181
Roof Sink
072
Hardware
4 x
S3
22 x
S0
2 x
S11
181
#8 x 2-1/2" Wood Screw
#8 x 7/8" Truss Screw
#8 x 2" Truss Screw
59
Fig. 20.3
View from Bottom
Fig. 20.5
201
S0
Narrow Angle
Bracket
Other Parts
2 x Roof Sink
1 x Narrow Angle Bracket
Roof
Sink
x 10
S0
per
sink
Roof
Sink
202