KidKraft Cedar Summit Timber Trail Playhouse Installation And Operating Instructions Manual page 56

Step 19: Roof Assembly
Part 1
A: Position (192) Roof Panel LM and (193) Roof Panel RM with the slats facing up. Place panels together at the
narrow ends making sure they're flush. (fig. 19.2)
B: Measure 2" up from the bottom of the panels then center and install 1 Jamb Mount using 4 (S0) #8 x 7/8" Truss
Screws. Measure 4-1/8" up from the top of the Jamb Mount and install a second Jamb Mount using 4 (S0) #8 x 7/8"
Truss Screws. (fig. 19.1, 19.2)
C: Place 2 (191) Roof pieces together with the slats facing up, making sure they're flush. Place 2 Jamb Mounts
centered over the panels, measuring to ensure there is a 15" space between the two. Attach using 4 (S0) #8 x 7/8"
Wood Screws per Jamb Mount. (fig.19.1, 19.3)
Fig. 19.1
x 4 per
S0
mount
Jamb
Mount
Wood Parts
2 x Roof 1 1/8" x 34" x 25 3/4"
191
1 x Roof Panel LM 1 1/8" x 25 3/4" x34 5/16"
192
1 x Roof Panel RM 1 1/8" x 25 3/4" x 34 5/16
193
Jamb
Fig. 19.3 Mount
Flush
Fig. 19.2
192
Jamb Mount
2"
50mm
Flush
191
15"
382mm
Hardware
16 x #8 x 7/8" Truss Screw
S0
56
193
4-1/8"
Flush
106mm
Other Parts
4 x Jamb Mount