KidKraft Cedar Summit Timber Trail Playhouse Installation And Operating Instructions Manual page 38

Step 12: Bay Window Assembly
Part 3
C: In the 2 outside openings of the Bay Window Assembly Top Set place 1 (122) Bay Window Wide making
sure that there is a gap measuring greater than 1/2" between the wall and the (122) Bay Window Wide. Install
using 1 (S0) #8 x 7/8" Truss Screw per side. It is important to make sure that board orientation is correct as
shown in figures 12.9 and 12.10.
D: Place (121) Bay Window Narrows at the inside locations on the Bay Window Assembly Top Set and attach
using 2 (S0) #8 x 7/8" Truss Screws per side. (fig. 12.8, 12.9)
Fig. 12.8
Fig. 12.9
Bay Window
Assembly
Top Set
Note: Notch
facing the
outside
122
Wood Parts
2 x Bay Window Narrow 3/4" x 2" x 21 9/16"
121
2 x Bay Window Wide 3/4" x 2 1/2" x 21 13/16"
122
S0
Note notch orientation of outside boards
121
S0
Note: Notch
facing the
outside
121
122
Hardware
6 x #8 x 7/8" Truss Screw
S0
38
Fig. 12.11
Larger than 1/2"
(12.7mm)
L
122
Fig. 12.10
Note notch orientation of
outside boards
Note notch orientation of outside bo
Other Parts
1 x Bay Window Assembly Top Set