Table of Contents
Advertisement
UPS5000-A-400 kVA
User Manual (50 kVA, PF=0.9)
3.
Step 6 Use a manual pallet truck to transport the power cabinet and bypass cabinet to the installation
position. Ensure that the two cabinets align with each other.
----End
3.1.5 (Optional) Combining the Power Cabinet and Bypass
Cabinet
Procedure
Step 1 Install the bottom, middle, and top connecting plates for the power cabinet and bypass
cabinet.
Step 2 Connect the removed copper bars and battery copper bar components based on their numbers.
Step 3 Reconnect the removed cables to the power cabinet system signal interface board, and bind
the cables.
Step 4 Check that the combination of the power cabinet and bypass cabinet is complete and secure.
Step 5 Reinstall the side cover and rear cover.
----End
Issue 03 (2020-01-10)
Remove the two connecting plates from the bottom, as shown in
Figure 3-16 Removing the bottom connecting plates
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Figure
3-16.
53
Advertisement
Table of Contents
