Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Carefully read these instructions and the charging instructions in
the vehicle owner's handbook before charging the electric vehicle.
The following symbols may be found in this manual or on labels
affixed to the EVSE:
This means pay particular attention. Notes contain
NOTE
helpful suggestions.
CAUTION: This symbol means be careful. There is
potential of doing something that might result in damage to
the equipment.
WARNING: This symbol means danger. This is a
situation that could cause bodily injury. Before working
on any electrical equipment, be aware of the hazards
involved with electrical circuitry and standard practices for
preventing accidents.
ClipperCreek Electric Vehicle Supply Equipment (EVSE) is
designed with the safety concerns of the end user as an utmost
priority; however, the following safety precautions must be read
and followed:
Safety Guidelines
•
Use this EVSE to charge electric vehicles equipped with
a conductive charge port only. See the vehicle's owner's
handbook to determine if the vehicle is equipped with a
conductive charge port.
•
Make certain the EVSEs supply cable is positioned so it will
not be stepped on, tripped over, or otherwise subjected to
damage or stress.
•
There are no user serviceable parts inside. Refer to the
Customer Support section in this manual for service
information. Do not attempt to repair or service the EVSE
yourself.
•
Do not operate the EVSE with a visibly damaged supply
cable or EVSE. Refer to the Customer Support section
in this manual for information on contacting a Service
Representative.
WARNING: Turn off input power to the EVSE at the
circuit breaker panel before servicing or cleaning the unit.
CS 3-Phase Installation Manual
Page 5
Advertisement
Table of Contents
