Table of Contents
Advertisement
XRT C Series User Manual
If the connection test fails:
•
Please determine proper connection type for your Internet access, and inserting all
necessary parameters obtained from your service provider, on the final screen of the
Wizard, click OK button to finish the Internet access configuration. At this moment,
your router will try to use the data provided to establish the Internet connection.
•
If the connection fails, please verify if all the parameters are correct, and the physical
connections between your computer and the Cable/DSL modem.
If your ISP has recorded your MAC (hardware) address, please go back to Wizard and select
Clone MAC Address on the Cable modem menu. Change the MAC address to match the value
expected by your ISP.
Main Screen
After logging in XRT, you will see the Home screen. When you connect in future, you will see
this screen when you connect. An example screen is shown below.
Navigation & Data Input
•
Use the menu bar on the left of the Home screen, and the "Back" button on your Browser,
for navigation.
•
Changing to another screen without clicking "Save" does NOT save any changes you may
have made. You must "Save" before changing screens or your modifications will be
ignored.
Hint
Figure: Home Screen
On each configuration page, clicking the
button will display help for that
screen. From help screen, you can access the
list of all help files (help index).
26
Advertisement
Table of Contents
