User's Manual of PL-802
Chapter 3: Configuration
3.1 Overview
The PL-802 uses 128-bit AES encryption to block outside access. The key is set by using the
Configuration Utility. By default, the protection is enabled; however, it is recommended to change the
default network password. All your Powerline devices must use the same network password in order
to be connected together.
3.2 Main Screen
Part 1: Scanning a Local Powerline Device
Double-click the PowerPacket Utility icon on your desktop and utility screen will show up below:
The main tab shows the Powerline units that are connected to the current computer and other
Powerline devices on the home network, and it will also display Mac Address of each device.
18