Table of Contents
Advertisement
Access Control extension page – Add PC
Parameter Description
Client PC
Description
Client PC IP
Addresses
Client PC Service
Protocol
Port Range
Scheduling Rule
Description for access control rule on client PC.
Enter the IP address range that you wish to apply the Access Control
rule. This is the user's IP address(es) that you wish to setup an Access
Control rule. You can select a range of users simply by inputting the
starting users' last digit (octet) IP address and the last user's last octet
IP address in the appropriate boxes. If you want to select only one user
then input the user's last digit IP address in both boxes.
You can apply limitation on the clients from accessing some Internet
services by checking the services you want to block.
Select UDP or TCP traffic you'd like to block.
You may configure up to five port ranges in Access control. XRT will
block clients from accessing Internet services that utilizes these ports
for communications.
You may select one of the existing Scheduling Rule and XRT will
block Internet access on the clients during schedule.
Machine Configurations
55
Advertisement
Table of Contents
