Planet XRT-401C User Manual page 77

Internet broadband router
Hide thumbs Also See for XRT-401C:
Table of Contents

Advertisement

00000000.00000000.00000000.00000111. This is a convenient and efficient method for
routers to route IP packets to their destination.
ISP Gateway Address: (see ISP for definition). The ISP Gateway Address is an IP address for
the Internet router located at the ISP's office.
ISP: Internet Service Provider. An ISP is a business that provides connectivity to the Internet
for individuals and other businesses or organizations.
LAN: Local Area Network. A LAN is a group of computers and devices connected together in
a relatively small area (such as a house or an office). Your home network is considered a LAN.
MAC Address: MAC stands for Media Access Control. A MAC address is the hardware
address of a device connected to a network. The MAC address is a unique identifier for a
device with an Ethernet interface. It is comprised of two parts: 3 bytes of data that corresponds
to the Manufacturer ID (unique for each manufacturer), plus 3 bytes that are often used as the
product's serial number.
NAT: Network Address Translation. This process allows all of the computers on your home
network to use one IP address. Using the broadband router's NAT capability, you can access
the Internet from any computer on your home network without having to purchase more IP
addresses from your ISP.
Port: Network Clients (LAN PC) uses port numbers to distinguish one network
application/protocol over another. Below is a list of common applications and protocol/port
numbers:
Application
Protocol
Telnet
TCP
FTP
TCP
SMTP
TCP
POP3
TCP
H.323
TCP
SNMP
UCP
SNMP Trap
UDP
HTTP
TCP
PPTP
TCP
PC Anywhere TCP
PC Anywhere UDP
PPPoE: Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a secure data
transmission method originally created for dial-up connections; PPPoE is for Ethernet
connections. PPPoE relies on two widely accepted standards, Ethernet and the Point-to-Point
Protocol. It is a communications protocol for transmitting information over Ethernet between
different manufacturers
Protocol: A protocol is a set of rules for interaction agreed upon between multiple parties so
that when they interface with each other based on such a protocol, the interpretation of their
behavior is well defined and can be made objectively, without confusion or misunderstanding.
Port Number
23
21
25
110
1720
161
162
80
1723
5631
5632
Appendix A - Troubleshooting
73

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xrt-402cXrt-204c

Table of Contents