Table of Contents
Advertisement
LAN IP
LAN IP address
IP Subnet Mask
DHCP Server
Lease Time
IP Address Pool
Domain Name
Click Apply button to save the configurations. You may now continue other
configurations or start using your router.
Hint
Note
UPnP Configuration (XRT-401C)
UPnP support in RT-401C can let your UPnP service ready workstation, for example Windows
ME, XP or later, easily find your router without rebooting your computers. More than these,
UPnP function also can let UPnP enabled applications that using special protocols pass through
your XRT-401C smoothly.
XRT's LAN port IP address (Your LAN clients default gateway IP
address) Default LAN IP of XRT: 192.168.0.1
Subnet Mask value for your LAN segment.
You can enable or disable the DHCP server. By enabling the DHCP
server the router will automatically give your LAN clients an IP
address. If the DHCP is not enabled then you'll have to manually
configure LAN client's IP addresses; make sure the LAN Client is in
the same subnet as your router if you want XRT to be your LAN
client's default gateway.
Default DHCP server operation in XRT is turned on.
You can specify the time period that the DHCP lends an IP address to
your LAN clients in the Lease Time field. DHCP server in XRT will
issue different IP address for LAN side clients while the DHCP leased
time reached.
You can assign an IP address range for DHCP server in XRT to issue
IP addresses to for LAN side clients.
A domain name can be specified in this field for your LAN.
You must NOT have two (2) or more DHCP
Servers on the same LAN segment. (If your
LAN does not have other Routers, this means
there must only be one (1) DHCP Server on
your LAN.)
You still can assign Fixed IP Addresses to
some devices while using DHCP, however,
please provide Fixed IP Addresses NOT within
the range used by XRT's DHCP Server.
Machine Configurations
45
Advertisement
Table of Contents
