Table of Contents
Advertisement
XRT C series User Manual
Checking TCP/IP Settings - Windows 9x/ME:
1.
Select Control Panel - Network. You should see a screen like the following:
2.
Select the TCP/IP protocol for your network card.
3.
Click on the Properties button. You should then see a screen like the following.
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, XRT will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from XRT.
Using "Specify an IP Address"
If your PC is already configured, check with your network administrator before making the
following changes:
Figure: Network Configuration
Figure: IP Address (Win 95)
10
Advertisement
Table of Contents
