Table of Contents
Advertisement
Parameter Description
Port Type
Policy
DNS
DDNS
Once you have made a selection, click More Configuration at the bottom of the
screen and refer relevant sub-sections for further configurations.
Extended WAN Configuration
Port Type settings (XRT-402C/XRT-204C)
Dynamic IP configuration
Choose the Dynamic IP selection if your ISP will automatically give you an IP
address. Some ISP's may also require that you fill in additional information such as
Host Name, Domain Name and MAC address (Please refer to "Cable Modem" section
for more detail information.)
PPPoE (PPP over Ethernet) configuration
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet.
Your ISP should provide all the information required in this section. (Please refer to
"PPPoE "section for more detail information.)
XRT-204C WAN configuration page
WAN port connection type enabled on your router.
Specify the interactions between WAN connection interfaces.
You can specify a DNS server you'd like to use.
DDNS allows you to map the dynamic IP address to a static domain
name. It is required to obtain an account, password and DDNS domain
name from the DDNS service providers. DDNS service support in
XRT C series are DynDNS and TZO.
Machine Configurations
39
Advertisement
Table of Contents
