Table of Contents
Advertisement
5.
Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, XRT will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from XRT.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
•
Enter XRT's IP address in the Default gateway field and click OK. (Your LAN
administrator can advise you of the IP Address they assigned to XRT.)
•
If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
Figure: TCP/IP Properties (Win 2000)
Preparations & Installation
17
Advertisement
Table of Contents
