Attaching The Slide Rails To The Rack - IBM Power System IC922 Manual

Attaching the slide rails to the rack

You might need to attach the mounting hardware to the rack. Use the procedure to complete this task.
The information is intended to promote safety and reliable operation, and includes illustrations of the
related hardware components and shows how these components relate to each other.
Procedure
1. At the front of the rack, align the pins on end of the left rail (1) with the rear of the rack.
Figure 2. Aligning the end of the left rail to the rear of the rack
2. Swivel the rail retention bracket out. Push the rails into the rear rack flanges (2) until they click into
place (3). Swivel the rail retention bracket so that it locks onto the rack flange.
4 Power Systems: Installing the System and Ordered Parts for the IBM Power System IC922 (9183-22X)