Starting The N1091..Ca Series Ieee 802.3 Nrz Compliance Test Application - Keysight Technologies N1091 CA Series Getting Started

Starting the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application

After you install the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application on a PC without
the N1010A FlexDCA interface, follow the steps below to start the N1091..CA Series IEEE 802.3 NRZ
Compliance Test Application:
1
2
3
Figure 78
4
5
•
IEEE 802.3 NRZ Compliance Test Application Getting Started
Ensure that the 86100D or N1000A Oscilloscope is added to the Keysight Connection Expert and
that the connection is active. Refer to
Expert" on page 66.
From the Windows Start menu, navigate to Start>All Programs>Keysight FlexDCA Applications>802.3
Test App and click Launch 802.3 Test App.
The IEEE 802.3 NRZ Test Application banner appears followed by the Connect to FlexDCA dialog.
Connect to FlexDCA dialog
Enter the SICL address or VISA alias, if known, else select the Select from Keysight Connection Expert
option to find the SICL Address/VISA alias.
Click OK to connect.
The default view of the IEEE 802.3 NRZ Test Application appears.
Installing N1091..CA on a PC Without N1010A FlexDCA
"Adding 86100D or N1000A to Keysight Connection
3
75