Starting Test Station Configurator; Test Station Selection - Keysight Technologies N5991 Getting Started Manual

5 Using the Software

Starting Test Station Configurator

Test Station Selection

28
The set of test instruments that are used for a specific application are
referred to in the following as "Test Station" or in short "Station". The test
station is controlled by a suitable PC and the N5991 Test Automation
Software Platform. Once the N5991 Software is installed successfully, two
icons will appear on desktop such as "ValiFrame Station Configuration"
and "ValiFrame" (see Figure 12
The ValiFrame Station Configuration must be started prior to launching
ValiFrame. It allows you to select the required set of instruments.
Double-click the icon (see
to access the ValiFrame Station Configuration on a Windows-based PC:
Click Start > BitifEye Application N5991 > Application Station
Configuration (N5991).
Figure 12 Station Configuration Icon (Example for PCIe)
Keysight N5991 Test Automation Software Platform Getting Started Guide
and Figure 17).
Figure 12) to launch the software. Alternatively,