Installing The N1091..Ca Series Ieee 802.3 Nrz Compliance Test Application - Keysight Technologies N1091 CA Series Getting Started

3 Installing N1091..CA on a PC Without N1010A FlexDCA

Installing the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application

Follow the steps below to install the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application
and its license as well as the license for the 86100DU-401 or N109X-401. When the license for
86100DU-401 is installed, the 86100DU-401 software is enabled.
1
When you redeem an IEEE 802.3 NRZ Test App license, you must select whether to install the
N OTE
application on the Oscilloscope or a specific PC.
2
3
4
5
Figure 60
N OTE
62
Go to www.keysight.com and search for and download the compliance application. Install the
application on the specific 86100D or N1000A for which you redeemed the license.
Save the license file that you received from Keysight in a folder on the local disk or in an
accessible memory device.
If not already done, purchase an 86100DU-401, F-AEYE, or N109X-401 license. Save the license
file that you received from Keysight in a folder on the local disk or in an accessible memory
device.
If the N1010A FlexDCA is running on your PC, close FlexDCA.
From the Windows Start menu, click All Programs>Keysight License Manager to launch the Keysight
License Manager.
Launching Keysight Connection Expert from the Start menu
Keysight License Manager version 5.1 (and higher) have a different user interface than version
5.0 (or earlier). Even though the path to launch the Keysight License Manager is the same for
both versions, refer to the Keysight License Manager Online Help for the respective versions to
find more information about the functionality of the application.
IEEE 802.3 NRZ Compliance Test Application Getting Started