Validating 86100D's or N1000A's SCPI Server Setup
N OTE
1
2
3
Figure 65
4
IEEE 802.3 NRZ Compliance Test Application Getting Started
This section lists the steps for 86100D DCA-X oscilloscope. Perform similar steps for the
N1000A DCA-X oscilloscope.
On the 86100D Oscilloscope or the PC hosting the FlexDCA software, launch the Keysight
FlexDCA application.
Click Tools > SCPI Programming Tools > SCPI Server Setup.
In the SCPI Server Setup dialog, confirm that the Sockets and HiSLIP interfaces are selected and
enabled as shown in
Figure
86100D's SCPI Server Setup Dialog Box
Close the SCPI Server Setup dialog box.
Installing N1091..CA on a PC Without N1010A FlexDCA
65.
3
65