Connecting N1010A Flexdca To 86100D Or N1000A - Keysight Technologies N1091 CA Series Getting Started

Connecting N1010A FlexDCA to 86100D or N1000A

N OTE
N OTE
1
2
3
Figure 43
4
IEEE 802.3 NRZ Compliance Test Application Getting Started
If you are using the N1010A FlexDCA Software on your PC to launch the N1091..CA Series IEEE
802.3 NRZ Compliance Test Application, make sure that the Oscilloscope and your PC are
connected to the LAN.
This section lists the steps for 86100D DCA-X oscilloscope. Perform similar steps for the
N1000A DCA-X oscilloscope.
On the 86100D Oscilloscope, launch the Keysight FlexDCA application.
From the FlexDCA's main menu, click Help > About FlexDCA.... The About 86100D dialog box
appears.
In the System Information area, scroll down to view the Computer Name entry.
Alternatively, you can obtain the computer name from the Windows System properties.
86100D Oscilloscope's hostname
Record the Computer Name (corresponds to hostname) as you will need this name later in this
procedure.
86100D Computer Name: ________________________
Installing N1091..CA and N1010A FlexDCA on a PC 2
43