Festo CPX-FB37 Translation Of The Original Instructions page 67

5 Diagnostics
Diagnostics message
The diagnostics message of the bus node is stored in the diagnostics history.
1
Values of the diagnostics message
Fig. 5.2 Diagnostics message
The following table provides a brief description of the individual values of the diagnostics message 1
from Fig. 5.2.
Value (hex)
02 00 00 E1
02 02
02 37
1F C5 9D61 31 00 00 00
05 00
02
05 00
80
Tab. 5.13 Values of the diagnostics message
Festo – P.BE-CPX-FB37-EN – 1406NH – English
Designation Explanation
according to
ETG.1020
Diag Code CPX error number 2 (short circuit)
E1=CPX error number (
E8=Error code according to DS401
Flags Number of parameters in the diagnostics message (2)
and diagnostics type 2 (error message)
Text-ID Reference to the ESI file with the plain text of the
diagnostics message (<TextId>#x3702)
Time Stamp Local time stamp (time since the start of the bus
node)
Flags Parameter 1 Type of parameter 1 (UNSIGNED8)
Parameter 1 CPX module number 2 (in TwinCAT 3.x corresponds to
module 3)
Flags Parameter 2 Type of parameter 2 (UNSIGNED8)
Parameter 2 Channel 80
1
CPX system description)
(channel 128 decimal)
h
67