Festo CPX-FB37 Translation Of The Original Instructions page 6

CPX-FB37
Notes on this documentation
This description contains information regarding the installation and configuration of the CPX bus node,
as well as EtherCAT-specific information regarding parameterisation, commissioning and diagnostics of
a CPX terminal in an EtherCAT network.
CPX-FB37
Tab. 1 Overview
Additional information regarding EtherCAT can be found online (
Product-specific information about the control system (IPC, PLC or I/O controller) can be
found in the manufacturer's documentation accompanying the product.
General basic information about the mode of operation, mounting, installation and
commissioning of CPX terminals can be found in the CPX system description
(P.BE-CPX-SYS-...).
Information about additional CPX modules can be found in the description for the respect-
ive module.
An overview of the structure of the CPX terminal user documentation is contained in the
CPX system description.
All documents are also available on the Festo website
( www.festo.com/sp).
Service
Please consult your regional Festo contact if you have any technical problems.
6
Description
Ethernet-based CPX bus
node for EtherCAT
Connection technology
2 x M12 socket, D-coded, 4-pin,
corresponding to
IEC 61076-2-101,
®
SPEEDCON -compatible
www.ethercat.org).
Festo – P.BE-CPX-FB37-EN – 1406NH – English