Start-up procedure
May 2020
Figure 7-4: Display Controller
WARNING
Failure to follow these instructions may cause warranty invalidation, property damage,
and/or personal injury or death.
DO NOT, under any circumstances, press the top two buttons on the display controller
simultaneously. This will override the system code supplied with the analyzer and display
the default program screen for the controller.
This will lock the software controlling the analyzer requiring the analyzer to shut down
externally and restarted risking a possible corruption of the software and loss of the
analyzer operation during the shutdown and restart process.
It is essential that only trained, qualified personnel operate the controls on the analyzer.
Figure 7-5: Default Program Screen
68
Reference Manual
00809-0100-4511
Emerson.com/Rosemount