Reference Manual
00809-0100-4511
The host equipment includes:
•
A two-pole main isolator (circuit breaker) that controls the application of electrical
power to the analyzer
•
Power cables and interconnecting wiring that connect to the analyzer
•
Pneumatic pipes/hoses and associated T-pieces, pneumatic connectors and fittings,
etc., that route the gas sample to and from the analyzer
•
Any gas conditioning equipment necessary to condition the gas sample before it is
routed to the analyzer
11.4
Repairable faults
The repair and servicing procedures given in this manual describe all repairs and servicing
that can be undertaken by the customer maintenance personnel. In all cases, the repair is
directly replace the faulty item with a known serviceable item.
All other items must be repaired or replaced by Emerson.
NOTICE
In general, if any optical component other than the cell assembly, laser module, and the
detector are deemed unserviceable, the analyzer must be repaired by Emerson personnel.
The repair, replacement, and alignment of the optical components requires the use of
specialized optical test/calibration equipment and procedures to ensure the correct
operation of the unit.
Rosemount CT5100
Troubleshooting and diagnostics
May 2020
105