Qualified Personnel; Software Version - Emerson Rosemount CT5100 Reference Manual

Introduction
May 2020
All lasers used within the analyzer are Class 1. The emitted laser light is invisible (mid-
infrared) and the pulse duration so short that the unprotected eye will not be damaged.
The nature of the laser beam path and beam width further ensures that it should be
impossible to cause any eye damage. The analyzer has warning labels at appropriate
positions in accordance with USA 21 CFR 1040.10.
General safety notice/residual risk
Installation, operation, and maintenance of the analyzer must be in accordance with these
instructions.
When operated as intended and all applicable safety instructions are observed, an element
of risk will remain, including, but not limited to, the following:
• The emission of gases hazardous to health may be possible when all gas connections
have been correctly made.
• To avoid exposure to the dangers of residual risks, take particular care when installing,
operating, maintaining, and servicing the analyzer.
1.4

Qualified personnel

In-depth specialist knowledge is an absolute requirement for working with and on the
analyzer. Personnel installing, operating, servicing, and maintaining the analyzer must be
instructed, trained, qualified, and authorized personnel of the operating company for
hazardous areas and the manufacturer.
It is the operating company's responsibility to:
• Train staff
• Observe safety regulations
• Follow the safety instructions and procedures in the product manual
Operators must:
• Be trained
• Read and understand all relevant sections of the product manual before commencing
work
• Know the safety mechanisms and regulations
WARNING
To avoid explosions, loss of life, personal injury, and damage to this equipment and on-site
property, do not install, operate, maintain, or service this analyzer before reading and
understanding this reference manual and receiving appropriate training.
1.5

Software version

The analyzer includes software that is used to control the operation of the analyzer. This
manual describes the software version as: 5.7.13.
16
Reference Manual
00809-0100-4511
Emerson.com/Rosemount