Table of Contents
Advertisement
Chapter 9
9.3
Mainframe And General Specifications
Display
Type
Back Lighting
Controls
Channel Active
Output Connectors
Temperature Controller (TEC)
Dual Temperature Controller (TEC)
Laser Diode Driver (LDD)
Dual Laser Diode Driver
MOPA Laser Diode Driver
Combination LDD/TEC
Chassis Ground
GPIB Connector
RS232 Connector
Power Requirements
Size (H x W x D)
Mainframe Weight
Modules Weight
Operating Temperature
Storage Temperature
Laser Safety Features
Isolation
In accordance with ongoing efforts to continuously improve our products, Newport
Corporation reserves the right to modify product specifications without notice and
without liability for such changes.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifications
LCD graphics display, 240 (W) x 128 (H) pixels
Green LED
Brightness and Contrast (contrast optimizes viewing angle)
Green LASER ACTIVE LED indicates that at least one Laser Diode output is on
and the LCD graphics shows details of active channels.
15-pin female D-sub
Two 15-pin female D-sub
9-pin female D-sub, BNC (external Modulation), BNC (auxiliary photodiode input)
Two 9-pin female D-sub
15-pin high density female D-sub , 9-pin male D-sub
9-pin female D-sub (LDD), and 15-pin female D-sub (TEC)
4 mm Banana Jack
24 pin IEEE-488
One 9-pin male D-sub
90 to 132 volts, 5 Amp Max.; 198 to 250 volts, 2.5 Amps Max. (user selectable),
50 to 60 Hz
133 mm x 426 mm x 356 mm (5.25 " x 16.75" x 14")
14.3 kg (31.5 lbs.)
1.1 kg (2.5 lbs.), typical weight each
0 to 40°C, < 70% relative humidity non-condensing
-20°C to 60°C, < 90% relative humidity non-condensing
Laser Enable Key switch, Interlock, Output Delay (meets CDRH US21 CFR
1040.10). Interlock and output delay are part of the Laser Module.
All modules electrically isolated with respect to each other and from earth ground.
109
Advertisement
Table of Contents
